MTWSCGA0700I-LTA-C01
Features
1, Quickly implement interface design
2, Touch screen realizes HMI
3, 65K true color display,wide viewing angle
4, Wide temperature
Features
1, AA：154mm（H）*86mm（V）
2, Resolution: 1024(H) x 600mm(V)
3, Display Type: TFT
4, Brightness：250nit
5, Viewing angle：178°
6, Display color：65K (65536) color
7, Connector: RS232/ RS485
8, LCD 0perating Voltage: DC 5~15V, it is recommended to use 12V, 1A DC power supply
9, 0perating Teperature: -20°C~70°C
10, Storage Teperature: -30°C~80°C
11, Backlight Type： LED
Features
HMI Applications Such As New Energy, Smart Home Appliances, And Vehicle Panels
MTWSCGA0700I-LTA-C01
SPI serial peripheral interface
Synchronous, full duplex bidirectional 4-wire serial interface bus. It is a system composed of a single master device and multiple slave devices.
I2C bus
A synchronous, half duplex bidirectional two wire serial port bus. It consists of two buses: a serial clock line SCL and a serial data line SDA.
RS232 serial communication
There are two transmission lines and one ground wire. The RS-232 serial communication transmission distance is about 15 meters. It can achieve bidirectional transmission, full duplex communication, and a low transmission rate of 20kbps.
RS485 serial communication
RS-485 adopts balanced transmission and differential reception, thus having the ability to suppress common mode interference.
RS422 serial communication
RS-422 has four signal lines: two for sending, two for receiving, and one for ground wire, which is full duplex communication.
CAN bus
CAN, short for Controller Area Network, is a serial communication network that can achieve distributed real-time control. The CAN bus has complex and intelligent functions. Mainly used for automotive communication.
USB communication serial bus
The USB interface has at least four cables, of which two are data cables, and all USB data transmission is completed through these two cables. Its communication is much morecomplex than serial ports.
1-wire bus
1-Wire, launched by Dallas in the United States, is an asynchronous half duplex serial transmission. Using a single signal line, both the clock and data are transmitted, and the data transmission is bidirectional.